09-23-2016 13:01 - edited 03-04-2017 10:04
09-23-2016 13:01 - edited 03-04-2017 10:04
Firmware version 17.8.301.8 - Resolves a syncing issue with Apple iOS version 10.2
Workout mode missing? Not a problem! Just follow the steps for adding it back.
Hey everyone!
We're rolling out a new update for Blaze, release notes below:
This release also resolves the following issue:
Important to note: A sync is required after a manual shutdown or a battery drain in order to show the correct time on Blaze. This is especially important for your activity tracked by Blaze because you'll want to make sure it's associated with the current date and time.
09-26-2016 11:45
09-26-2016 11:45
I must have the latest serial number produced.... waiting with baited breath
09-26-2016 11:47
09-26-2016 11:47
Took about 10 mins, initially a little laggy until it 'cleaned up'. App showed all the clock faces and they changed first time. Loving it, just waiting for a notification now.
09-26-2016 11:48
09-26-2016 11:48
09-26-2016 11:51
09-26-2016 11:51
Just received my update! Thank you Fitbit team 🙂
09-26-2016 11:51
09-26-2016 11:51
My new faces and reminders to move is on. Total updating was about 8 mins on my end. I hope you all get your update today. I'm relieved to not have to wait anymore. The reminders to move will come in handy. I sit at a desk and when I get busy I forget to move within the hour so this is a major plus for me. Thanks to Andrew for patiently updating us all as much as he could.
09-26-2016 12:03
09-26-2016 12:03
09-26-2016 12:04
09-26-2016 12:04
@MatthewFitbit I am using my phone to connect. It reacts to my press and changes color.. but nothing more. It comes right back when I release my finger.
09-26-2016 12:10
09-26-2016 12:10
@Suncountry Do you have a computer available to try the update via Fitbit Connect? That might be the simplest way to get updated.
If not, let me know which phone model and OS you are using. Please also verify that Bluetooth is on and that you are able to sync your tracker.
09-26-2016 12:10
09-26-2016 12:10
09-26-2016 12:10
09-26-2016 12:10
Hi! Got my update today! Works great and worth the wait. Thank you!
09-26-2016 12:12
09-26-2016 12:12
@MatthewFitbit I figured it out. I had to update the app (iPhone) to the most recent version. Once I updated the app and went back in, it is now updating. Thanks! ...btw.. I typically do not connect my Mac to the Fitbit.
09-26-2016 12:14
09-26-2016 12:14
I just received the update. Now I can see the hours I moved 250+ steps on my Blaze. But why does it say 0/8 hours for today? The app says 4 hours. I just restarted the Blaze, no change. Anybody else with that problem?
09-26-2016 12:17
09-26-2016 12:17
@fischmar76 - I am in the same boat. I bought last week and I still don't have the update. Sounds like they are going oldest to newest and we are in the back of the bus.
09-26-2016 12:21
09-26-2016 12:21
09-26-2016 12:21
09-26-2016 12:21
09-26-2016 12:24
09-26-2016 12:24
@fischmar76 - I have the same build as well.
09-26-2016 12:26
09-26-2016 12:26
Dang, everyone is getting the update except for this guy. Back to waiting.
09-26-2016 12:26
09-26-2016 12:26
09-26-2016 12:26
09-26-2016 12:26
@The_Lion - I've seen people post that it doesnt grab the pre update info. - All should be fine and synced after 12am heading into tomorrow. Congrats on receiving the update.
09-26-2016 12:26
09-26-2016 12:26