04-20-2016 19:15
04-20-2016 19:15
Answered! Go to the Best Answer.
07-28-2017 11:57
07-28-2017 11:57
Best Answer07-28-2017 11:59
07-28-2017 11:59
Best Answer08-05-2017 13:10 - edited 08-05-2017 13:17
08-05-2017 13:10 - edited 08-05-2017 13:17
Mine is also bricked(non-functional) reset procedure does nothing. The red dot someone mentioned is nothing more than a an ambient light sensor to control how bright or dim the display is (or should be).
I also found if I try plugging it into charge it becomes "burning" hot to touch.
Best Answer08-05-2017 13:20
08-05-2017 13:20
Best Answer08-09-2017 12:27
08-09-2017 12:27
Thanks MakMak, these seems to have worked for me. Very happy as thought I had lost the steps from my run😆
Best Answer08-16-2017 10:50
08-16-2017 10:50
Mine did this today and I thought it had lost charge but it hadn't. Saw your response and gave it a go. It worked like a charm! Thank you so much!
Best Answer08-22-2017 06:02
08-22-2017 06:02
Ditto. Reset not working. What else can fix blank screen?
Best Answer08-26-2017 20:08
08-26-2017 20:08
The reset has not worked. Tried a new charger, and it acts like it's charged and working, but the screen is blank.
Best Answer08-29-2017 09:58
08-29-2017 09:58
I had the very same issue. It happened when my battery was so low it was flashing red. I got home and plugged my blaze into charger. Green less were flashing. 2 hrs later no wake up in charger, less still flashing but black screen. Tried different charger same results. I found this forum and attempted reset. After 20 seconds no vibration, nothing on screen but now my green less were not on. I then connected my charging cable to my win 7 pc places my Blaze in cradle and Fit bit logo appears. Battery is very low but now I have a screen with display working and charging normally. Problem gone.
Best Answer08-29-2017 14:42
08-29-2017 14:42
Still didn't work. But thank you for the suggestion.
Best Answer08-31-2017 06:08
08-31-2017 06:08
Tried to restart and nothing happened. This product failed me twice in 1 year. First was broke then they sent me a new one. The second one just went within 1 year
Best Answer09-02-2017 16:02
09-02-2017 16:02
I have the Fitbit Blaze and today the screen has gone blank but i still have the flashing green lights underneath
I looked on here for some advice and followed the pressing the 2 buttons on the right together to restart it but nothing happened
It still is blank!
I use my fitbit for everything and im gutted that it don't work 😔
Any advice anyone
From someone who is upset
Best Answer09-02-2017 17:38
09-02-2017 17:38
Best Answer09-03-2017 04:54
09-03-2017 04:54
Best Answer09-03-2017 07:29
Gold Fitbit Product Experts share support knowledge on the forums and advocate for the betterment of Fitbit products and services. Learn more
09-03-2017 07:29
@Nativespirit, you need to press the left and bottom right buttons to reset your tracker. Try that instead!
MakMak | Community Council
If you find a response useful, please mark it as a solution to help others.
Check out the Lifestyle Forums for ways to get more active!
09-03-2017 15:07
09-03-2017 15:07
Same problem here, my batter is completely full,screen was on yesterday before I left for,work and when I got to work I noticed the black screen. Tried holding,down left,and bottom,right buttons with absolutely no response from the tracker. Cannot,get my computer to even,sync,with it
Best Answer09-04-2017 09:20
09-04-2017 09:20
Thanks for the advise. It worked.
09-12-2017 16:37
09-12-2017 16:37
My Fitbit Blaze purchased less than a month ago just stopped working - screen blank but flashing green lights still working. It was fully charged and I followed the advice and held down the two RHS buttons for greater than ten seconds and there was no response. What advice do you have for next steps. AllanD
Best Answer09-12-2017 22:13
09-12-2017 22:13
Best Answer09-13-2017 07:01
09-13-2017 07:01
Press the LHS and button RHS buttons for 10 seconds minimum. Not the 2 RHS buttons ok.
It worked for me. Hope it will work for you.