04-07-2016 05:17
04-07-2016 05:17
Answered! Go to the Best Answer.
04-07-2016 07:12
04-07-2016 07:12
Well... The restart should help and this should not be a recurring issue. I'd say, keep an eye on it and see how it works after the restart. If you notice this to happen constantly, feel free to reach out to the Support Team and they will be happy to help you out!
Let me know if you need anything else @DanO22060.
Help others by giving votes and marking helpful solutions as Accepted
04-07-2016 06:24
04-07-2016 06:24
Hi there @DanO22060. Good to see you around! 🙂
It could be that the vibrating motor is stuck. I'd recommend going to the stop watch or count down features and try them and reset them to see if your tracker vibrates. If it doesn't, it would help restarting your tracker by pressing the left button and the lower right one for about 10-15 seconds until it restarts and after that try it out and see how it goes.
If this doesn't work, feel free to get in touch with the Support Team and they will be happy to help you out!
Help others by giving votes and marking helpful solutions as Accepted
04-07-2016 06:36
04-07-2016 06:36
04-07-2016 07:12
04-07-2016 07:12
Well... The restart should help and this should not be a recurring issue. I'd say, keep an eye on it and see how it works after the restart. If you notice this to happen constantly, feel free to reach out to the Support Team and they will be happy to help you out!
Let me know if you need anything else @DanO22060.
Help others by giving votes and marking helpful solutions as Accepted
04-07-2016 08:18
04-07-2016 08:18
05-10-2017 07:05
05-10-2017 07:05
When i bought the Blaze a week ago , the vibration strenght although not as strong as the charge 2 , was noticable when receiving notification. However last couple of days the vibration is very weak. I have tried all trouble shooting steps with no success to resolve this issue. When I called customer support I was given a explanation that this was related to the last firmware upgrade which was installed on the blaze when I initially set it up and Fitbit was working on a new firmware release to fix the issue. Is this true? Do I have to keep returning the product until I get one which works 100% ? Does fitbit check the products thoroughly prior to release ?