04-01-2016 19:52
04-01-2016 19:52
04-02-2016 03:39 - edited 04-02-2016 03:45
04-02-2016 03:39 - edited 04-02-2016 03:45
Wear constantly on the outside, no sign of scratches so far.
From the All About Fitbit Blaze
How big is Blaze's display, and what is the display made of?
Fitbit Blaze has a screen size of 31.75mm diagonally, with a display area of 25.38x19.04mm. The display offers 16-bit color at a resolution of 240x180 pixels. The screen is scratch resistant and is made of Corning Gorilla Glass 3.
Gorilla Glass 3 Test (YouTube)
https://www.youtube.com/watch?v=7M1FSbGo9fU
* CES 2013 (Video by TechnoBuffalo)
04-02-2016 09:06
04-02-2016 09:06
04-02-2016 18:14
04-02-2016 18:14
04-04-2016 12:42
04-04-2016 12:42
Hello @Bsaalwaechter, @Rich_Laue, @ThePreacher and @SunsetRunner! 🙂 @Bsaalwaechter For all-day wear when you’re not exercising, your Blaze should usually rest a finger’s width below your wrist bone and lay flat, as you would normally wear a watch. For improved heart rate accuracy keep these tips in mind:
1. Experiment with wearing the tracker higher on your wrist during exercise. Because blood flow in your arm increases the farther up you go, moving the tracker up a couple inches can improve the heart rate signal. Also, many exercises such as push-ups cause you to bend your wrist frequently, which is more likely to interfere with the heart rate signal if the tracker is lower on your wrist.
2. Do not wear your tracker too tight; a tight band restricts blood flow, potentially affecting the heart rate signal. That being said, the tracker should also be slightly tighter (snug but not constricting) during exercise than during all-day wear.
3. With high-intensity interval training or other activities where your wrist is moving vigorously and non-rhythmically, the movement may prevent the sensor from finding an accurate heart rate. Similarly, with exercises such as weight lifting or rowing, your wrist muscles may flex in such a way that the band tightens and loosens during exercise. Try relaxing your wrist and staying still briefly (about 10 seconds), after which you should see an improved heart rate reading.
Also the screen on Fitbit Blaze is scratch resistant and is made of Corning Gorilla Glass 3 so you shoudn't experience any issue with the tracker's display. And as @Rich_Laue mentioned it depends on how comfortable you feel when wearing it!
Catch you later! 😉
It is health that is real wealth and not pieces of silver and gold! Share your story!
04-08-2016 10:26
04-08-2016 10:26
I tried wearing my Blaze higher on my wrist during workouts, as recommended by fitbit, but it slides down. Any suggestions? (The workouts cross-fit type with lots of different movements.) Thanks!
04-09-2016 05:00 - edited 04-12-2016 06:10
04-09-2016 05:00 - edited 04-12-2016 06:10
Hello @FunBeth welcome to the Fitbit Community! I haven't tried this but I read on another thread that some users are wearing a sweat band to keep the tracker in place.
Hope this helps! 🙂
It is health that is real wealth and not pieces of silver and gold! Share your story!
04-09-2016 16:33
04-09-2016 16:33
04-12-2016 06:11
04-12-2016 06:11
Hello @FunBeth thanks for your reply! 😉 Let me know how it goes with the sweat band.
Happy stepping!
It is health that is real wealth and not pieces of silver and gold! Share your story!
04-12-2016 06:31
04-12-2016 06:31
I also wore my ChargeHR on the inside of the wrist and got what I felt were more accurate readings. however, the inside of the wrist hits the desk when typing, so I only wear the Blaze on the outside and I have been very happy there.
05-06-2016 04:00
05-06-2016 04:00
I've only had my Blaze 2 days so I'm still getting used to it, but I did a kettlebell class last night and covered it with a sweatband as I was worried I might damage the face if I caught it with the kettle. During one exercise I did stop and turn the face to the inside of my wrist as we were performing the 'snatch' and I was worried the repeated knocking with the kettle would be bad,even with the sweatband. The problem I had was that it paused it's self a couple of minutes after being turned round. Not sure if this was due to the sweatband or it's being turned round. The HR and calorie count also seemed lower than with my usual chest strap. I will perservere and see what happens as it is Insanity tonight so it won't need to be turned round or covered and I will get a better comparison.
05-06-2016 04:35
05-06-2016 04:35
@Katndog1 welcome. The workout paused because the button got pressed, you might want to come for th screen lock function. That really is the best I can say while I am say that it has nothing to do directly with the at it is being worn, in your case for now it does look this way. Doing a search you'll see this is not just happening to you or the position being worn.
08-04-2016 08:53
08-04-2016 08:53
Hi, I have a new Charge HR. I wore it on the outside of my wrist yesterday, and it seemed to record my workout this morning. I switched to wearing it on the inside of my wrist because I think it looks cooler, but got crappy data from this mornings workout. How exactly does the Fitbit gather data?
And please don't use the word wristbone if you choose to respond to this. I'm a slightly OCD science teacher. There is no single bone in the human body named wristbone.
Thanks,
Howard
08-04-2016 21:18
08-04-2016 21:18
@txhoward wrote:Hi, I have a new Charge HR. I wore it on the outside of my wrist yesterday, and it seemed to record my workout this morning. I switched to wearing it on the inside of my wrist because I think it looks cooler, but got crappy data from this mornings workout. How exactly does the Fitbit gather data?
And please don't use the word wristbone if you choose to respond to this. I'm a slightly OCD science teacher. There is no single bone in the human body named wristbone.
Thanks,
Howard
@txhoward Welcome.... This has always been a "bone of contention" in the Forums.
This post from @AngelaMa sheds some light and the bad data maybe as Angela has posted....
I'm sure I read in the forums about capillaries and return blood flow but I cannot find that.
02-11-2017 21:16
02-11-2017 21:16
So what is the issue? You have tiny blood vessels on the inside of wrist as well.. Also less hair. I find my fitbit to be highly accurate on inside of wrist. 20 to 30 bpm off on top, no matter where on my wrist, and loose tight etc. Seems like alot of people have the same opinion.
04-06-2017 12:31
04-06-2017 12:31
I used to have a Microsoft Band 2. I got used to wearing it on the inside of the wrist. It's really a lot easier to be discreet when checking things than having to pull your elbow up to look at the watch face. Anyway, I really miss the fact that quickview doesn't work that way. I wish we had an inside wrist option for quickview. I also liked the way the Microsoft band turned the screen on for notifications. My blaze only vibrates and THEN I have to wake the screen up to see it. Since Microsoft stopped making the band, a lot of previous Band users are going the Blaze route.
08-27-2017 17:41
08-27-2017 17:41
01-01-2021 11:16
01-01-2021 11:16
Personally, I have been wearing normal watches on the inside of my wrist for most of my life, so I also wanted to know if I can wear it the other way. If it won't negatively impact the accuracy of results, I will wear mine that way.
01-01-2021 12:43
01-01-2021 12:43
The only thing it may affect is Quick View or what now is called Screen Wake . If it does then disable for a little less in battery drain.