05-02-2017
06:36
- last edited on
05-03-2017
05:29
by
AlejandraFitbit
05-02-2017
06:36
- last edited on
05-03-2017
05:29
by
AlejandraFitbit
Screen on my Blaze is rapidly moving back and forth. Still keeping track of everything. But rapidly moving back and forth on each screen, I can hardly read and stand looking at the screen. Anyone have this problem before?
Moderator edit: Subject for clarity
05-02-2017 11:11 - edited 05-02-2017 11:25
05-02-2017 11:11 - edited 05-02-2017 11:25
Mines started doing exactly the same thing this afternoon, I've email customer services for advice .
hi again - sorted mine by rebooting it - hold single left button and lower right button in at same time for 10-12 seconds and this reboots it - problem solved - hope it works for you as it's really annoying !!
05-03-2017 05:30
05-03-2017 05:30
A warm welcome to the Community @Bhappysun and @Carriecat thanks for stopping by.
As recommended, please try the restart procedure. After this your tracker should work properly.
Let me know how it goes.
05-03-2017 05:32
05-03-2017 05:32
Yup, did the same thing. Working good again!
05-03-2017 05:56
05-03-2017 05:56
Glad to hear that @Bhappysun, it's good to know that your Blaze is now working. If you need anything else, do not hesitate in posting it.
Happy stepping.
12-04-2017 22:13
12-04-2017 22:13
it worked....thank you
12-06-2017 07:33
12-06-2017 07:33
Hey there @bbrunsteinl, welcome to the Forums!
It's great to hear that the instructions provided in this thread were helpful for you and that your tracker is now working properly. If you need anything else, do not hesitate in posting it.
Keep the stepping up!
12-06-2017 16:23
12-06-2017 16:23
Mine was doing the same thing and thought maybe because I dropped it, but just shut it down and turned it back on and all is good.
12-10-2017 07:05
12-10-2017 07:05
Hey there @happysappy, it's great to welcome you!
I am glad to hear that this procedure worked for you, thank you for share it. I know more users will find this helpful. If you need anything else, do not hesitate in posting it.
Happy stepping!
01-03-2018 14:09
01-03-2018 14:09
The reboot fixed mine! Thanks!!
01-30-2018 12:11
01-30-2018 12:11
Hi there
I have had this issue just recently and the screen even stops me from tracking activity
I have tried to reset it and the problem still persists
Help
01-30-2018 14:18
01-30-2018 14:18
I have a similar problem. Week ago my Blaze suddenly started blinking and flicking. The picture is not readable at all, so I can't turn it off. Rebooting did the issue more severe - now there is only a white noise on the screen.
I tried to wait until the battery drains. Six days ago Blaze stopped syncing and had empty battery according to the application. But it still switching the screen on with all that ripple! When the battery going to drain enough to switch the clock completely? Is there another way to switch it off?
I'm very sad that this happened a month after the warranty ended. 😞
02-03-2018 04:24
02-03-2018 04:24
Finally the screen became blank. But now the Blaze is not charging. When I put it into the cradle, backlight is switching on, but without charging battery animation on the screen. And after few seconds backlight is switching off and immediately on and so on. If cradle is plugged into computer, all described above is accompanied by sounds of "Device plugged", "Device unplugged". So, I think my Blaze is completely dead. 😞
02-05-2018 04:06
02-05-2018 04:06
@VerWolf it sounds like dirty charging contacts. Try isopropyl alcohol and a Q-tip are piece of paper
02-05-2018 12:57
02-05-2018 12:57
@Rich_Laue, thank you for your advice, but it doesn't help, still blinking and not charging.
12-05-2018 12:49
12-05-2018 12:49
I tired the instructions to push single button and the bottom button on the other side, together for 12 secs. It reset it self it stopped
05-22-2019 15:43
05-22-2019 15:43
You hit the proverbial "Nail on the Head"!!! Thank you... I was getting seasick looking at my Fitbit.
05-23-2019 07:18
05-23-2019 07:18
Thanks for the advice. Worked perfectly and the screen is no longer blinking.
10-24-2019 12:37
10-24-2019 12:37
Thanks for this advice ..thank God it worked I thought my blaze was broke ..thanks again
04-06-2022 20:13
04-06-2022 20:13
That worked for my crazy acting Blaze! Thank you so much Carriecat for posting this. As much as I would’ve loved a excuse to get the waterproof Fitbit watch, I really can’t afford it right now so I’m happy that my good old Blaze is working normally again.