Stop the vibration

[SunsetRunner]

I have just switched from a charge 4 to a versa 4 and have plugged it in to charge. I've noticed it keeps buzzing/vibrating every couple of seconds which is so annoying. How do I disable this feature? I've tried looking in the manual and start ups but can only find references to vibrating for notifications. 

Thanks in advance 

[Guy_]

Hi @SunsetRunner - this is most likely a warning for something like poor charging, so try the following,

• make sure you removed all plastic from the back of the watch, see photo
• switch to a PC port as power supply,
• it is unlikely the terminals are dirty but clean them anyway
• restart the watch by holding the button for 10 seconds till it vibrates and the logo appears
• if it has been setup successfully, try turning if off in watch settings while it is charging. Turning it off beforehand will only start it again when it's placed on charge.
• If the last one works try changing to another clock face if you are not using the watch default face.

[SunsetRunner]

Hi Guy

Thanks so much for your reply 

It turns out the adapter I'd been using was faulty. I had switched to charging on a PC port as you'd suggested and it worked.

From there I worked out about the plug. 

Thanks so much for your help much appreciated