10-07-2017 18:35 - edited 10-07-2017 18:35
10-07-2017 18:35 - edited 10-07-2017 18:35
This morning my Blaze display started flickering from “snow” to the normal display. While it does appear to still be working the display is effectively useless.
Is this something that can be fixed with a reset? If not I need a new one. It’s only a few months old.
10-07-2017 19:31
10-07-2017 19:31
FYI, after checking in the troubleshooting area I was advised to shut diwn and restart. That appears to have worked. Hopefully it won’t happen again.
10-08-2017 03:30
10-08-2017 03:30
The blaze is susceptible to moisture damage, I used it whilst boxing and that totalled the screen and Heart Rate, If the problem comes back, just reset, (hold the left button and the lower right button for about ten seconds, until you see the Fitbit logo with the screen brightness increased) I personally sent mine back to Fitbit.
10-09-2017 06:11
10-09-2017 06:11
It's great to welcome you @lbmaxx, thanks for troubleshooting this by yourself and @SunsetRunner for stopping by.
I am glad to hear that after the restart procedure your Blaze started to work properly. If you need anything else, do not hesitate in posting it.
Keep the stepping up!
09-16-2018 03:35
09-16-2018 03:35
I tried resetting my fitbit but it continues to flicker. What should i do?
09-16-2018 13:28
09-16-2018 13:28
thank you. this fixed my watch. My screen was flickering back and forth the clock, messages, and screen. This reset suggestion worked.
09-17-2018 04:43
09-17-2018 04:43
Hey @srnicolai50 and @kat01kit17, a warm welcome to the Community.
I appreciate all the efforts in trying to fix this issue, @srnicolai50 it's great to know that your tracker is working properly now. And @kat01kit17, after checking with our support team, I was told that you have already created a case with them, I know they will be glad to help you out and provide you with a solution.
Let me know if you need anything else.
09-28-2018 07:19
09-28-2018 07:19
I suddenly have the same issue but my watch will not restart. I've done it successfully before, but it won't go to the logo and reboot. It just goes to sleep until I let go of the buttons.
09-30-2018 04:08
09-30-2018 04:08
It's great to see you here @Lantonio04.
I appreciate all the efforts in trying to fix this issue. Since the restart process didn't work, I've gone ahead and escalated your case to our support team, for them to take a deeper look at this. Please keep an eye on your inbox for further instructions.
Catch you later.
09-30-2018 17:07 - edited 09-30-2018 17:08
09-30-2018 17:07 - edited 09-30-2018 17:08
Mine flat-lined today with the bright screen, than flicker,... clock face error, than no display at all after resenting the clock display twice. I tried to reset it, and even tried to place it on the charger to see if there were signs of life, nope. No display, no green lights. I have only had it for 5 months. It shouldn't die from sweat alone, if it is as advertised. ( Water resistant) It failed right in the middle of my high intensity cardio, the moment I need it most. This is the second one that dies way before a year has passed. I have purchased Blazes as gifts only to be embarrassed when I have to return defective ones. I consider my self to be a pretty loyal costumer with fitbit, but they have been letting me down. ¯\_(ツ)_/¯