03-02-2016 16:16
03-02-2016 16:16
03-02-2016 16:50
03-02-2016 16:50
03-02-2016 17:24
03-02-2016 17:24
Same situation here - off about 30% on my treadmill walk. Very dissapointed as my flex was actaully much more accurate
03-05-2016 20:56 - edited 03-05-2016 21:06
03-05-2016 20:56 - edited 03-05-2016 21:06
The treadmill walk can be adjusted by setting up the stride. Please remrmber if the epeed changes, so will the stride. Also holding onto the handrails can not only cause the tracker to miss steps, but can cause injury to the user.
As for the GPS i haven't used mine enough to comment, but so far seems to be accurate.
On android ypu wpuld want to set the accuracy to GPS only.
For the elyptical this is hard for the Blaze to figure out, since this distance is a fictitious distance, based on the circumference of the wheel and how much it turns per step. Neither measurement is known by Fitbit. Then to add to the difficulty the elyptical is measuring distance when your not stepping. IE coasting, Fitbit would see this time as standing still. Now Fitbit doesn't use your steps to figure the calories, it goes by the HR and time.
03-06-2016 05:17
03-06-2016 05:17
I see now the ability to adjust stride in setup - significant improvement in accuracy.
03-06-2016 05:38
03-06-2016 05:38
03-06-2016 06:53
03-06-2016 06:53