09-25-2017 22:24
09-25-2017 22:24
All of a sudden the watch went nuts.
In the best case my screen flashes and moves about once a second.
The worst case scenario it moves so fast that it is not possible to read anything. It jumps following the green lights at the back.
It all depends on the screen I choose.
It worked quite well for about two months though.
The communication with my telephone seems to be working well.
Am I the only lucky one with this crazy device?
Answered! Go to the Best Answer.
09-04-2018 07:00
09-04-2018 07:00
Thanks for this. I had similar problem. Solved it via the reset mode. Works perfectly now. Many thanks
09-26-2017 05:13
09-26-2017 05:13
It's great to see new faces @victor-ausberto, welcome!
If your Blaze screen is not working as it should, I recommend restarting it by doing the following:
I hope this helps, let me know the outcome.
09-26-2017 09:28
09-26-2017 09:28
Hi Alejandra, thank you for your advice. It solved part of the problem, in fact the screen is now quite normal. However, it does not show the heart beats. The lights at the back of the device are blinking normally, but it does not accept any one of the displays showing heart beats.
09-26-2017 20:30
09-26-2017 20:30
Thank you! Mine just did this tonight. I reset it so far so good. 😊
09-26-2017
20:54
- last edited on
05-07-2018
04:02
by
AlejandraFitbit
09-26-2017
20:54
- last edited on
05-07-2018
04:02
by
AlejandraFitbit
Good for you
Mine is still bothering me because it is not reading heart beats
Have a super day.
Victor
Moderator edit: removed personal info
05-06-2018 10:13
05-06-2018 10:13
This does the trick and in less the 10 seconds!!! Thanks!
05-07-2018 04:04
05-07-2018 04:04
Hello, I hope you are doing fine.
I am glad to hear that the issue you were experiencing was fixed by following the instructions provided. About the heart rate, in this post, you will be able to see some things that might be affecting this reading and some tips to improve it.
See you around.
07-10-2018 05:14
07-10-2018 05:14
I had the same problem and this solved it. Thank you!
07-11-2018 04:06
07-11-2018 04:06
It's great to hear that your Blaze is now working properly @MarshaKellum, if there is anything else we can do for you, do not hesitate to post it.
Keep the stepping up.
09-04-2018 07:00
09-04-2018 07:00
Thanks for this. I had similar problem. Solved it via the reset mode. Works perfectly now. Many thanks
06-21-2019 03:47 - edited 06-21-2019 03:49
06-21-2019 03:47 - edited 06-21-2019 03:49
2019 and the solution is still working. Thank you!
06-25-2019 07:56
06-25-2019 07:56
Thanks....it worked great!
09-21-2019 14:48
09-21-2019 14:48
Yay!! It worked. Took me several attempts as I had taken it out of the wrist strap holder and I don't think I was pressing the buttons exactly right. Nevertheless it ultimately worked just as you described. Thank you!