01-19-2016 16:46
01-19-2016 16:46
Hello
I was wondering what is the band width of the Blaze?
I already have many watch bands and I wanted to check which size would fit the Blaze. Thanks
Answered! Go to the Best Answer.
01-20-2016 10:33
01-20-2016 10:33
@Nez @SunsetRunner Our default device bands are about 7/8s of an inch in width. While I can't confirm whether watch bands will work on the device, I'm sure there are possibilities. I was at CES, and there were a few watch enthusiasts who mentioned that it wouldn't be too difficult to put watch bands onto te device.
01-20-2016 01:42
01-20-2016 01:42
Believe only Fitbit Bands are currently compatible for the Blaze, since the Bands are attached to the Frame where the Blaze will be inserted.
01-20-2016 10:33
01-20-2016 10:33
@Nez @SunsetRunner Our default device bands are about 7/8s of an inch in width. While I can't confirm whether watch bands will work on the device, I'm sure there are possibilities. I was at CES, and there were a few watch enthusiasts who mentioned that it wouldn't be too difficult to put watch bands onto te device.
01-20-2016 11:03
01-20-2016 11:03
Cool @EmersonFitbit 😊
02-22-2016 14:21
02-22-2016 14:21
02-28-2016 07:12
02-28-2016 07:12
Checking in to see if you had any luck with the Basis band? Tks.
03-09-2016 08:14
03-09-2016 08:14
I have tried several different 22mm replacement watch bands and all have fit and seem to be very secure.
06-16-2016 17:27
06-16-2016 17:27
12-06-2016 09:03
12-06-2016 09:03
They don't work natively. The pin is too long. I replaced the basis pin with the blaze pin and then had to cut down the basis band to fit.