physical dimensions?

[Wilsondesign]

Fitbit,

I had the Surge and I was looking to compare the size of the Surge and the Blaze. 

I assume that the Blaze is thinner (from the sideview) but wider and taller (from front fiew), but I couldn't find any specifications.

Blaze dimensions in OR out of the watch-band as compared to the Surge dimensions would suffice.

Metric prefered.

Thank you Fitbit, Allen

[MatthewFitbit · Accepted solution]

@Wilsondesign You can find Blaze's dimensions on this page, under "Sizing."

The physical dimensions of the tracker screen are identical to Surge's measurements - however, it's worth noting that Blaze has a much smaller bezel on its display, allowing it to have a larger and higher resolution display, measuring 0.75" x 1.00" (roughly 21mm x 24mm).

Blaze's watch frame, which the tracker snaps into, is 1.58" across (about 42mm).

[Wilsondesign]

Is there any info about the thickness from glass front to heart monitor?

[EmersonFitbit]

Just measured it, we're looking at about 7 to 8 millimeters, or about a quarter of an inch! @Wilsondesign

[Sarata]

How large is the frame? The screen seems small which is great but I worry about the frame size and if it's too bulky. I plan on ordering a small but it depends how large the frame is.

[Rich_Laue]

@Sarata I've moved your post to the thread about your question, a quick search of the Forum helped here.

[E60m5power]

the website is saying a different dimension now. a week ago it was .82 x .96 now its .75 x 1. what is the correct one? 

[EmersonFitbit]

@E60m5power Nice catch!

I've edited the post above. The "touchable" portion of the screen on the Blaze is .75" x 1.00." 

Thanks for posting!

[JayKwfu]

What is the depth (height) of the Blaze compared to the Surge?  Is one of them narrower from bottom to top (from wrist side to top of display screen)?

[EmersonFitbit]

@JayKwfu The Blaze is thinner in this respect, clocking in at 7 to 8 millimeters from memory (post is above). 

[amy_xmas]

I am looking for the dimensions of the frame that the tracker pops in to. Mostly the measurement from pin to pin. I have a small wrist and want to make sure it's not going to be hanging off.

[Aacoman]

Hello, do you know if the Blzae special edition face is the same size as the original Blaze face?

[Rich_Laue]

Yes @Aacoman

[Aacoman]

---

@Rich_Laue wrote:

Yes @Aacoman

---

Thanks!

[perksjr]

It's unbelievable there isn't good information about the basic size of the Fitbit Blaze online.  The size of the band is out there, but even this post which claims to provide the physical dimensions describes the width of the case as 42mm, but what is the height?  Most watches show both the width and height (for instance, the Apple watch clearly states it's 42mm high and 35.9mm wide).  Can anyone from Fitbit provide the height?  Thanks.

[cdnfl]

What are the case dimensions of the small Blaze?  42mm across (width) but how tall?

[Rich_Laue]

The case is the same size as the large, the only difference is in the lean gtg of the band .

[cdnfl]

Ok, so what are the dimensions of the large case?

[Rich_Laue]

See @MatthewFitbit's post above. It is the post marked as the solution. 

[cdnfl]

Arrggghhh!  Why is this so hard?  MatthewFitbit's post tells the width, which he states is 42mm.  What is the height? This is the measurement I need as it will determine if the case size will fit my wrist, which is abnormally small.