01-13-2016 13:01
01-13-2016 13:01
Answered! Go to the Best Answer.
01-13-2016 13:54
01-13-2016 13:54
@Croc_Rocks I clean both my Flex and ChargeHR with alcohol swab pads. Sometimes I'll spray rubbing alcohol on a soft cloth (like the ones used to clean a computer monitor or eye glasses) and wipe the devices that way.
I've done this for over two years and it works great.
01-13-2016 13:06
01-13-2016 13:06
Have you tried the care instructions provided with your Charge HR? You should not put it under water, use mild soap on a damp wash cloth to wipe it down and then a damp wash cloth to rinse it/wipe the soap off.
01-13-2016 13:54
01-13-2016 13:54
@Croc_Rocks I clean both my Flex and ChargeHR with alcohol swab pads. Sometimes I'll spray rubbing alcohol on a soft cloth (like the ones used to clean a computer monitor or eye glasses) and wipe the devices that way.
I've done this for over two years and it works great.
01-13-2016 14:02
01-13-2016 14:02
05-26-2016 17:21 - edited 05-26-2016 17:21
05-26-2016 17:21 - edited 05-26-2016 17:21
Can you even clean the "plug" / "charging" portion of the Fitbit with the rubbing alcohol? I'm afraid to put liquids near that part.
Thank you!
05-27-2016 08:18
05-27-2016 08:18
Hello and welcome to the forums @buddefly
Which Fitbit do you have?
I use rubbing alcohol to clean just about everything electronic since a computer tech told me that is what he used. It dries quickly and often is the only way to clean something.
When my batteries corrode, rubbing alcohol and a toothpick will save the flashlight. I figure it also works for my Fitbit pieces.
05-27-2016 12:35
05-27-2016 12:35
So far I've used Cetaphil on a damp paper towel and wiped it dry. Seemed like it was relatively easy on the device. I cleaned my GPS watch the same way (which I've never washed in the ~3 years I've owned it until I read the instructions for the Fitbit Charge HR )
07-18-2016 14:10
07-18-2016 14:10
@odyssey13 Your computer tech gave you good advice. Alcohol is often used directly on circuit boards to remove soldering rosin residue.
Regards,
Gary
07-18-2016 17:20
07-18-2016 17:20
@garybartlett good techs always share their tips.
Another thing rubbing alcohol can do - it can make a wasp gasp long enough to run or stomp on it. I keep it in a spray bottle.
07-20-2016 13:21
07-20-2016 13:21
Hello my fitbit friends i just clean my fitbit Charge HR in the plum I clean it with the eyeglass wips and I use Sarna Lotion for my arm.. The Sarna Lotion don't break out in a rash or itchy too...
I hope Sarna is good
and thanks of reading my post
#fitbit fan melissa
04-26-2019 06:27
04-26-2019 06:27
I have the Inspire HR, and am trying to figure out what to clean the band with. I know to clean the contacts, etc. with alcohol, but what to clean the band with? The instructions that came with it said to use a non-soap cleaner, but I have no idea what kind of product that would be. I have sensitive skin and am starting to break out under it, so I want to be able to keep it as clean as possible. I already switch off arms and use cortisone cream, but I think keeping it clean will be the best thing. Can you give some examples of non-soap cleaners?
04-26-2019 10:04
04-26-2019 10:04
Hello and welcome to the forums @Pseudonurse
Cetaphil is mentioned in the Product Care article - click to read
I experienced a problem with the band when I failed to clean and dry it. When I keep my band and my wrist dry, there is no rash. Might be, with your sensitive skin, you'll need to be more careful, too.
While you're here, take a look around the Lifestyle Discussion forum area. You can join in the various discussions, share recipes or get some tips on healthy living. It's a great forum.
Hope to see you around more often.