03-26-2017 04:33
03-26-2017 04:33
Answered! Go to the Best Answer.
03-26-2017 07:43
03-26-2017 07:43
@AlexThom, I moved this thread to the iOS App Help Forum - users with iPhones will be able to provide more help here.
03-26-2017 07:32
03-26-2017 07:32
@AlexThom, it sounds like you are trying to "pair" your Charge 2 tracker with your iPhone by using the phone's Bluetooth settings instead using the Fitbit app, is that correct? It must be setup/paired using the Fitbit app, not the phone's Bluetooth.
03-26-2017 07:39
03-26-2017 07:39
Okay. I don't really know how to tell it to do that. It used to work, but doesn't now. So I don't know how to tell it to just set up (or re-set up) through the Fitbit app.
03-26-2017 07:43
03-26-2017 07:43
@AlexThom, I moved this thread to the iOS App Help Forum - users with iPhones will be able to provide more help here.
03-26-2017 08:08
03-26-2017 08:08
Let's look at Fitbits help site http://help.fitbit.com/?q=setup
03-26-2017 09:27
03-26-2017 09:27
I have a charge HR and have been battling the same issue for the last week. Its a pain and I have tried to fix it in every way possible I could find through google, youtube, and this site. I have found that plugging the device into the charger and resetting it while in the bluetooth menu will eventually get it to connect so I can sync. However, it does not work the first time so it requires a bit of patience. Also, it is not a permanent fix. I have been having to do it daily. Extremely annoyed.
03-26-2017 09:33
03-26-2017 09:33
@chefd93 is your Fitbit software up to date? Are you syncing through a computer, phone, iPad?
As for the Bluetooth screen this should not matter since the Charge 2 does not have this screen.
Have you tried restarting or even shutting down the device you sync through?
03-26-2017 09:43
03-26-2017 09:43
@Rich_Laue my fitbit software is updated, and I sync through my iphone. I should have been more specific about the bluetooth screen. I go into the settings page on the phone and go to the bluetooth page. There it will show "Charge HR" and say "Not Connected" If I select the device it will attempt to connect before failing and telling me to make sure the device is on and in range. I then select the option to forget the device. After that I plug the Charge HR into the charger and reset it over and over until it eventually is picked up by the phone's bluetooth and shows "Connected"
03-26-2017 09:54
03-26-2017 09:54
If your using the phones Bluetooth settings page to pair your tracker, I believe you are doing it wrong. The instructions say that only the app is able to do this. On Android the tracker doesn't even need to show up in the list of Bluetooth devices when it syncs. It only needs to show when notifacations are enabled. Hopefully someone who knows more about ios will pop in.
Now normally a restart of the tracker restart of the phone, or telling the Bluetooth to forget the device, then go to the app and do a sync. There should be no reason to pair it through the Bluetooth settings.
03-26-2017 13:41
03-26-2017 13:41
Thank you.
03-26-2017 13:49
03-26-2017 13:49
@Rich_Laue wrote:@chefd93 is your Fitbit software up to date? Are you syncing through a computer, phone, iPad? As for the Bluetooth screen this should not matter since the Charge 2 does not have this screen. Have you tried restarting or even shutting down the device you sync through?
I don't know if it's up to date. I assume it is. How would I find that out? I am synching via my iPhone, that that usually relays the info to this website as well (both have been extremely slow, like taking the whole day for the past two days). I deleted the app, then downloaded it again. Nothing changed.
03-26-2017 13:51
03-26-2017 13:51
@Rich_Laue wrote:
Now normally a restart of the tracker restart of the phone, or telling the Bluetooth to forget the device, then go to the app and do a sync. There should be no reason to pair it through the Bluetooth settings.
Thanks, I'll try that.
03-26-2017 14:11
03-26-2017 14:11
@chefd93 wrote:@Rich_Laue I plug the Charge HR into the charger and reset it over and over until it eventually is picked up by the phone's bluetooth and shows "Connected"
Maybe that is it. I don't know how to reset the Charge 2 from the Charge 2 watch itself. I didn't know you could do that. Or is the HR different than the Charge 2?
03-26-2017 15:31
03-26-2017 15:31
I deleted and reinstalled. And it's working fine now. Thanks everyone. 🙂