Cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Sense won't charge

Replies are disabled for this topic. Start a new one or visit our Help Center.

I have tried every thing .

Different power outlet 

cleaned the back and cable connection 

held the button on the side for 5 minutes 

nothing works 

please help

Best Answer
7 REPLIES 7

Mine won't charge either. It is only a couple months old and everything else seems to be working fine. I'm using the same charger that I always have used and even tried different USB ports. 

Best Answer

Suggest you call or use Chat with Support. They can confirm it is not working and replace it with warranty. Good Luck! 

Best Answer

@ymc Have you wiped the charger pins? Those are known to have a poor connection. Clean wipe with an alcohol pad or a "dirty" wipe with saliva on a finger gets the connection going for me.

20220313_192306-COLLAGE.jpg

I have a USB meter to see the charge numbers on my devices. The top pic is a poor connection with only 0.075A and 0.378W. The bottom pic I did a quick wipe and connected it again (you can tell by the only 30 seconds difference) and the improvements were immediate with 0.232A and 1.172W. At that rate, it's fast charging and I can get about 2.2% battery per minute.

Best Answer

I always use isopropyl alcohol with a cotton round to clean the back of the watch. Then I use a dipped

q-tip to clean the watch areas where the cable prongs are accepted. I also use a dipped q-tip for cable prongs. I never did a dirty wipe. 🤣

 

I still get from time to time the slow charge announcement. If I reposition the cable and turn the watch on it’s side during the charge it usually fixes it. 
I also use the SimpleWatchPro face. I love the fact it 

give me a charge history as well as expected time til full charge. Also the charge status is referenced. There is also an option to leave the face with charge progression illuminated while attached to the cable and charging. 

 

 

Sense Activation 11/3/20\IPhone 12 Pro Max\SimpleClockPro Watch Face\Spigen Rugged Armor Pro Case/Band
Best Answer

I just received my new Sense as a replacement for my recalled Ionic (which worked great). I charged it initially and had a little trouble with it, had to wiggle the cable. Wore it almost a week, went to charge it, and nothing. So it died.  Tried all the suggested tricks (even though it was brand new). Called and had them send a replacement- they only sent the body of the watch, nothing else. THAT one won't work either. So I'm guessing it's either the charger or two bad watches. I'm really frustrated and almost sorry I bought it.

Best Answer
I’m disappointed too . Once the product is purchased there is NO AFTER SERVICE.
No help 🤬
I’d never recommend Fitbit to anyone


Sent from my iPhone
Best Answer
Hello mdibari,
Thanks for your post. For mine,  I started looking at the little prongs on my charger and realized one was flush with the base of the charger. I assume it was not able to make the necessary connection. I ordered another charger and it did charge my Fitbit, however the display still said it was not getting a good connection so how long it will last is anyone's guess at this point.


Sent from Yahoo Mail for iPhone
Best Answer