03-01-2016 03:46
03-01-2016 03:46
03-01-2016 03:49
03-01-2016 03:49
There is not a setting to adjust the sensitivity of it. I had the opposite problem - mine was being activated too frequently so I have turned mine off.
Kelly | Oklahoma
Alta HR, Blaze, Flex 2, Charge 2, Charge, and Aria * IPhone 7+
03-01-2016 11:33 - edited 03-01-2016 11:36
03-01-2016 11:33 - edited 03-01-2016 11:36
I have been having the same issue. When I turn my wrist it only turns the screen on maybe half the time.
03-01-2016 21:45
03-01-2016 21:45
03-02-2016 18:32
03-02-2016 18:32
03-02-2016 20:10
03-02-2016 20:10
On your website dashboard, click on the gear icon on the top right and then click on the Blaze tile. You should get to the settings page. Scroll down and check on the Quick View Gesture and make sure it is turned on. Hope this helps.
Warren | Cincinnati, OH
Versa Lite, Ionic, Charge3, Inspire HR, Blaze(retired), Alta( retired),- Pixel 3
Take a look at the Fitbit help site for further assistance and information.
03-03-2016 03:04
03-03-2016 03:04
03-03-2016 08:01
03-03-2016 08:01
I am having exact same problem
03-03-2016 09:54 - edited 03-03-2016 09:55
03-03-2016 09:54 - edited 03-03-2016 09:55
I was having the same problem, then realized I wasn't raising it high enough. If I raise it about a foot from its original position, it comes right on so..... if my wrist is already at chest level (running or wresting on an armrest) -> raise it to eye level , if my arm is straight down-> raise my wrist to my chest level.
03-03-2016 11:15
03-03-2016 11:15
Mine very seldom works. Too bad, thats a very good feature.
03-03-2016 11:46
03-03-2016 11:46
03-03-2016 12:11 - edited 03-03-2016 12:11
03-03-2016 12:11 - edited 03-03-2016 12:11
Having same issue. I wear mine with face on inside of my wrist and thought maybe that's why mine was only working part of the time but it seems others have the same issue. Hopefully an update will rectify the issue.
03-03-2016 12:17
03-03-2016 12:17
I've combined a coiple of threads on this subject.
For more info on how to activate quick view please see this page, for @FerdinandFitbit and my response.
03-11-2016 06:57
03-11-2016 06:57
I am having the same issue, howerver I have noticed that I get different results depending on the watch face I have selected. The Original Face seems most sensitive and works more often than not for Quick View, however I would prefer Zone Clock Face, but this only works circa50% of the time.
03-11-2016 12:01
03-11-2016 12:01
I notice with mine if I flick my wrist really quick it does not work but if I do it slowly it works.
03-11-2016 12:27
03-11-2016 12:27
There is a submission already started about this over on the Feature Request board. If you would like to see the sensitivity of quick view adjusted, I suggest viewing this submission and giving it a like . The more likes it has that better the chances that Fitbit picks up on it as an issue!
03-13-2016 08:42
03-13-2016 08:42
03-16-2016 08:53
03-16-2016 08:53
03-19-2016 08:39
03-19-2016 08:39
03-28-2016 10:20
03-28-2016 10:20
Ditto. It doesn't work with a flick of the wrist, you have to raise and twist. Super annoying when you are sitting down. Current functionality makes it impossible to quickly check the time.
IMO the clock face should be on all of the time. The Surge works great, why change the functionality ?