05-09-2016 04:59
05-09-2016 04:59
Answered! Go to the Best Answer.
10-16-2016 02:04
10-16-2016 02:04
I am continually having these problems with my Blaze. It can be charged and connected to my mac, blue tooth on (on only one device) and no sync. Cannot 'sync now' from the fitbit icon as it is grey out. I have restarted the Blaze, reinstalled the app, gone through setup again on my mac, on software on all devices are up to day. I have tried absolutely everything (and I mean absolutely everything) thing that the forums and Fitbit have suggested to be absolutely sure that I am doing nothing wrong and exploring all possiblities.
It is a little frustrating that Fitbit have not been more attentive to this thread/issue.
10-20-2016 14:54
10-20-2016 14:54
@Anewlucia Hey there! If you're having syncing issues, I would like you to try this syncing procedure.
@TooleMr Welcome to the Community! Thank you so much for the troubleshoot that you've done. In this case, I would like you to contact Customer Support so they can further help you. Don't forget to let them know all the steps that you already did.
Hope this helps. Thanks for your understanding.
Want to get more active? Visit Get Moving in the Lifestyle Discussion Forum.
10-25-2016 04:37
10-25-2016 04:37
I have tried ALL of these suggestions and nothing works.
I reinstalled the app and I am now stuck in the install process at the "not working" screen.
It says to make sure it's charged, restart the tracker and turn off/on blue tooth.
I have done ALL3 and now my phone is stuck and searching/spinning- I can't even finish the installation of the app- for the 2nd time.
I want to scream!!!!!!!!! UAAAAAAAAA
10-25-2016 04:38
10-25-2016 04:38
I have tried ALL of these suggestions and nothing works.
I reinstalled the app and I am now stuck in the install process at the "not working" screen.
It says to make sure it's charged, restart the tracker and turn off/on blue tooth.
I have done ALL3 and now my phone is stuck and searching/spinning- I can't even finish the installation of the app- for the 2nd time.
10-25-2016 16:06 - edited 10-25-2016 16:06
10-25-2016 16:06 - edited 10-25-2016 16:06
thanks (to the Moderator Silvia) for the reply but no thanks. I have contacted customer service many times, I have done all they have suggested when they suggestsed it. I have reinstalled and set up the blaze again (which I have done numerous times before), it is working fine now. But EVERY time i get it to work again, it lasts a few weeks and then everything needs to be reset again. I am tired of Fitbit sugessting things I have already tried because you have it on a piece of paper to tell me to do that. I am tired of retelling this story and then having Fitbit make another suggestion of something that I have already tried, then I have to retell the story again. All Fitbit seem to do is ask me to justifly all the things that I have tried. They have never fixed the solution. I bought the Blaze because after less than a year my HR stopped working, would not update, and would not sync. I admit I gave up of the costumer service angle as nothing helped, and I know this is boring, but again had I to retell the story again of everything I tried. Then as a reply I get told "Great, now can you please try this!"
11-18-2016 04:43
11-18-2016 04:43
@SilviaFitbit I tried several option to sync the fitbit Blaze and no luck.
Steps taken: restart fitbit, restart iphone, uninstalled app-reinstalled, restarted the internet connection, and the last step was that I deleted blaze from app and did new setup and now it will not finish connecting to fitbit - The app remains on the number request screen trying to connect.
11-18-2016 08:16
11-18-2016 08:16
Hey @EuropaRosae I'm not sure how far into the setup process it fails, my guess the phone doesn't even detect the tracker. You will have to fix the cause of the none sync issue before you will be able to set it up.
There are three steps that should have been tried and I suggest trying them.
First go to your phones Bluetooth settings and tell it to forget the Blaze, leave the Blaze classic alone. This step might be all that is needed. Try to stop now.
On the Blaze Swipe over to settings - tap - scroll to the bottom and perform a shutdown. This will fix any locked up hardware.
Shut the iPhone off, not just a restart, especially if you just update the Fitbit app, or OS.
11-21-2016 03:06
11-21-2016 03:06
Sylvia,
Thank you for your email. After several tries, my win 10 app finally responded. The app was not finding the doogle, then it wasn't finding the Blaze. I cleaned my browser, removed the doogle, turned off the computer. After a few minutes, I started over again, with the same problem "Blaze not found." Later that day, I tried again and it connected as normal.
12-15-2016 23:46
12-15-2016 23:46
I deleted the app from my iPad and now it won't track to my phone
12-16-2016 15:21
12-16-2016 15:21
Thank you so much!! This solution worked for me! I was getting pretty frustrated and then I found your comment. Thanks for posting! Happy Running!
12-16-2016 15:27
12-16-2016 15:27
Hello @Gn9632 delegating the app does not remove the tracker from your ipad.. To do this you need to go into BT settings and tell it to forget the Blaze.
Now the phone has a better chance, unless you removed the blaze from your accoint.
Also take a look at the red banner above about iOS 10
01-03-2017 05:08
01-03-2017 05:08
01-03-2017 05:19
01-03-2017 05:19
I have had more problems recently,the thing that worked for me was shutting down the tracker. On your tracker,swipe past exercise, fitstar etc until you come to 'settings' and there scroll right down to the bottom, select 'shut down'. This seems to reset the Bluetooth. Hope this helps.
01-04-2017 07:35
01-04-2017 07:35
The latest iOS update messed up blaze syncing. This link explains: https://help.fitbit.com/articles/en_US/Help_article/2144
01-04-2017 07:41
01-04-2017 07:41
That's correct @Fiirvoen but the latest Firmware for the Blaze fixed this.
01-04-2017 09:35
01-04-2017 09:35
Right, but if the firmware fails to install, the link I previously posted addresses how to resolve that. The reason I posted here was because when I googled the issue, that link was the third result while this page was the first or second and did not link to that article at all despite it's relevancy.
01-05-2017 12:30
01-05-2017 12:30
A warm welcome to the Fitbit Family @Fiirvoen! This issue started happening on 12-15-2016. You can learn more about it by checking this post Blaze sync issue with iOS version 10.2. I believe that's the reason why this wasn't the first post that you got in the results because it was a bug. Which was resolved with the latest firmware version.
Thanks for letting the community know about the help article that you found.
Want to get more active? Visit Get Moving in the Lifestyle Discussion Forum.
01-13-2017 16:51
01-13-2017 16:51
I've heard you can get a frequency clash between wifi and Bluetooth; since switching off wifi; and using data instead I've been ok
01-14-2017 22:49
01-14-2017 22:49
I am so glad that I'am not the only one who experiening these problems. My blaze hasn't synced in weeks. Go figures the day I buy the premium it quits working.
01-15-2017 21:19
01-15-2017 21:19